Technical Specifications; General Menu - Fracarro HEAD LINE SIG7900 Instrucciones De Uso

Mains power
Power consumption
Operating temperature
Back panel connections
It is now possible to program all the HEADLINE modules from one point.
Connect the TPE programmer to the 1st interconnection module using the RJ45IN socket (if there
are more rows the RJ45OUT socket should be used by the PATCH-RJ45 cable).
Wait a few seconds for the TPE to search for all connected devices and create a map of the hea-
dend. The display will show information regarding devices found.
Once the search has been completed the Fracarro logo will be displayed. By pressing any button
(except X) you will enter the programming menu.
Each module is uniquely identifi ed by two numbers, the fi rst is the row number and the second
is the position number within the row. The row number is given by the interconnection module
(shown on the display) while the position number is identifi ed by the label (see the chapter "iden-
tifi cation of the module").
The diagram below shows the programming menu of the HEADLINE headend.
Refer to the operating instructions for each module to obtain information regarding their opera-
tion.
Fracarro

TECHNICAL SPECIFICATIONS

-5 ÷ 45°C
MODULE PROGRAMMING

1.0 GENERAL MENU

TPE
v0.03
Press any button except
HEADEND SETUP
KTP EMULATION
220-240V~, 50-60Hz
2W (stand alone)
100W max
230V~, RS485
18