RIDGID SeeSnake microREEL APX Manual Del Operador página 12

Installing the Drum
The microREEL case gives you the ability
to swap out the drum when the job requires
a different push cable and camera combi-
nation. Either microREEL drum can be in-
stalled in the microREEL case, as well as
the drums on the SeeSnake microDrain
and nanoReel systems.
™
To install the drum, follow these steps:
1. Open the microREEL case and re-
move the drum.
2. Place the drum you want to use in the
microREEL case.
3. Make sure the product name label
faces up.
4. Spin the drum to make sure it rotates
freely.
5. Close and lock the case.
12 – English – microREEL APX / microREEL CA
Inspection Overview
To perform a pipe inspection, connect any
See Snake monitor to the reel, power on the
system, push the push cable through the
pipe, and observe the display.
For advanced inspection options, such as
™
capturing media, locating the sonde, tracing
the push cable, and delivering reports, refer
to the manual that comes with your monitor.
Connecting to the Monitor
Connect the system cable to the monitor by
aligning the connector guide pin with the
socket and pushing the connector straight
in.
NOTICE
Socket
Guide Pin
Outer Locking Sleeve
Only twist the outer locking
sleeve. Never bend or twist
the connector.
Connector Ridge