Idiomas disponibles
Idiomas disponibles
ENGLISH
12. INSTRUCTION FOR USE
Start the trimmer before getting close to the grass to be cut.
Cut the grass by moving the trimmer from right to left and proceed slowly, keeping trimmer inclined
about 30°. High grass should be cut in layers, always beginning from the top .The cuts should be
short.
Do not cut damp or wet grass.
Avoid wearing the line out quickly by knocking against hard objects (stone, walls, fences etc) .Use
the edge of the guard in order to keep the trimmer at the right distance.
WARNING: Do not use Excessive Force or bash the Trimmer Bump Head on the ground to
advance the trimming line .If the trimming line will not advance after tapping the bump head on the
ground while the trimmer is running, the cutting line may have tangled or have disappeared within
the cartridge or the cutting line may have been used up.
NOTE: Excessive Force or Bashing the Trimmer Bump Head on the ground to advance the
cutting line will damage the bump head.
Warning: The cutting head continues to rotate after motor is switched off for a few seconds.
13. MAINTENANCE
1. After use, Remove battery pack from the battery holder and check for damage.
2. When not in use store the machine out of the reach of children.
3. Details of maintenance and adjustments which a user may carry out.
4. Use only manufacturer's recommended replacement parts and accessories. Where parts are
consumable(e.g. cutter line)the replacement part number shall be specified.
14. TROUBLESHOOTING
The following chart lists problem symptoms, possible causes and corrective action, if your garden
product does not operate properly. If these do not identify and correct the problem, contact your
service agent.
Fig. 13
12
