Zanussi ZDLN6531 Manual De Instrucciones página 19

CLEANING THE LOWER SPRAY ARM
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
TROUBLESHOOTING
WARNING! Improper repair of the
appliance may pose a danger to the
safety of the user. Any repairs must be
performed by qualified personnel.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
3. To install the spray arm back, press it
downwards.
CLEANING THE UPPER SPRAY ARM
Do not remove the upper spray arm. If the openings
in the spray arm are clogged, remove the remaining
particles of soil with a thin pointed object, e.g. a
toothpick.
Refer to the below table for information on possible
problems.
With some problems, the display shows an alarm
code.
19