Idiomas disponibles
Idiomas disponibles
Step 1
Install the Pole to the Desktop
Option A：Desk Clamp Assembly
1.Use 3 pieces M5x14 bolts(f) to install the C Clamp
brace(c) to the Pole. Use the Allen Key(o) to tighten
the bolts. See Figure 1.
2.According to the thickness of the desktop, Use 2
pieces M8x12 bolts(g) to install the C clamp(b) to C
clamp brace (c). Use Allen Key(o) to tighten the bolts
and then tighten the C clamp to the desktop by adjust-
ing the plastic knob. See Figure 2.
Option B: Grommet Base Assembly
Self Drilled Grommet Hole Installation
If the existing grommet hole comes with a plastic
protector, remove it to ensure a flat surface before
installing the desk mount
1.Use 3 pieces M5x14 bolts(f) to install Grommet
Base Plate(m) to the Pole(a). Use the Allen Key(O)
to tighten the bolts. See Figure 3.
2.Position the Pole(a) on the mounting surface and
under the desktop comes the Support Plate(j), M10
Washer(k), Spring Washer (l). Use the provided
Wrench(p) to fasten the plastic knob. See Figure 4.
Figure 2
Plastic Knob
Phillips Screwdriver
2
o
g
b
o
f
w2
l
a
f
c
w1
Figure 1
a
m
o
Figure 3
j
k
Figure 4
