KRESS KC100 Manual De Instrucciones página 10

D1
D2
EN
Connecting with the backpack harness
(See Fig. D3)
The trimmer can be connected with an accessory
backpack harness (not supplied). Refer to the
backpack harness manual for more information.
D3
TESTING THE TRIMMER AND BATTERY
(See Fig. E)
Checking the controls
Operator Presence Switch and Throttle Trigger
1. Remove the battery.
2. Try to press the Throttle Trigger. If the Throttle
Trigger can be pressed without depressing
10
the Operator Presence Switch, the Operator
Presence Switch is defective. Stop using the
trimmer and contact the service agent.
4. Hold and press the Operator Presence Switch
first, then press the Throttle Trigger.
5. Release the Throttle Trigger and the Operator
Presence Switch. If the Throttle Trigger or the
Operator Presence Switch is stuck and cannot
spring back to its original position. Stop using the
trimmer and contact the service agent.
E
Checking the display
1. Insert the battery.
2. Hold and press the On / Off Switch.
The product is switched on when the LED (a) is
lit.
The product is switched off when the LED (a) is
out.
3. Press the Operator Presence Switch first, then
press the Throttle Trigger to start the machine.
The Trimmer Head rotates.
4. If the warning indicator (b) lights up or is flashing,
refer to Troubleshooting for solutions.
5. Release the Throttle Trigger. The Trimmer Head
stops rotating after a short delay. If the Trimmer
Head continues to rotate, remove the battery and
contact the service agent.
OPERATION:
Starting the trimmer (See Fig. F1, F2)
F1
b
a
15m (50ft)