2.4.
Safe device use
a)
Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
b)
Make sure the plug is disconnected from the socket before attempting any
adjustments, accessory replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally activating the device.
c)
When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
g)
To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h)
When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be
used.
i)
Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
j)
Do not move, adjust or rotate the device in the course of work.
k)
Do not leave this appliance unattended while it is in use.
l)
Clean the device regularly to prevent stubborn grime from accumulating.
m) The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
n)
It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
o)
Keep the device away from sources of fire and heat.
p)
The oil used when the device is in operation reaches high temperature and
remains hot for a long time, also after use. Apply extreme caution to avoid
burns.
q)
Do not carry or shift the device filled with hot oil. Risk of burns.
r)
There is a risk of fire if the oil level in the machine is too low. Never use the
machine without the correct oil level.