Idiomas disponibles
Idiomas disponibles
EN
SAFETY INSTRUCTIONS
When using power tools, always
observe the safety regulations
applicable in your country to
reduce the risk of fre, electric
shock, personal injury and material
damage. Read the following safety
instructions before attempting to
operate this product. Keep these
instructions in a safe place!
1. Keep work area clean.
Cluttered areas and benches can
cause accidents.
2. Consider work area environment.
Do not expose power tool to
humidity. Keep work area well lit
(250 –300 lux). Do not use power
tools in the presence of infammable
liquids or gases.
3. Keep children away. Do not let
children come into contact with
the tool or extension cord. Keep all
people away from the work area.
4. Dress properly. Do not wear
loose clothing or jewelry.
They can be caught in moving parts.
Preferably wear Rubber gloves and
non-slip footwear when working
Outdoors. Wear protective hair
covering to keep long hair out of
the way. When working outdoors,
preferably wear suitable gloves
and non-slip footwear.
5. Personal protection.
Always use safety glasses.
Everyday eyeglasses only have
impact resistant lenses, they are
not safety glasses. Use a face or
dust mask whenever the operations
may production dust or fying
particles. If these particles might be
considerably hot, also wear a heat-
resistant apron. Wear ear protection
whenever the sound level seems
uncomfortable, i.e., if the sound
pressure stated in this manual
exceeds 85 dB(A).
14
6. Guard against electric shock.
Prevent body contact with earthed
surfaces (e.g. pipes, radiators,
cookers and refrigerators). For
use under extreme conditions (e.g.
high humidity, when metal swarf
is being produced, etc). Electric
safety can be improved by inserting
an isolating transformer or an earth
leakage circuit-breaker.
7. Do not overreach.
Keep proper footing and balance at
all times.
8. Stay alert. Watch what you are
doing. Use common sense.
Do not operate the tool when
you are tired.
9. Secure work piece.
Use clamps or a vice to hold the
work piece. It is safer and it frees
both hands to operate the tool.
10. Connecting dust extraction
equipment. If devices are provided
for the connection of dust extraction
and collection ensure these are
connected and properly used,
especially in confned areas.
11. Remove adjusting keys and
wrenches. Always check that
adjusting keys and wrenches are
removed from the tool before
switching on.
12. Extension cords for outdoor use.
When the tool is used outdoors,
only use extension cords intended
for outdoor use and marked
accordingly. Before use, inspect
the extension cable and replace if
damaged.
13. Use appropriate tool.
The intended use is laid down in
this instruction manual. Do not force
small tools or attachments to do the
job of a heavy-duty tool. The tool
will do the job better and safer at
the rate for which it was intended.
Do not force the tool.
WARMING: The use of any
accessory or attachment or
performance of any operation
with this tool, other than those
recommended in this instruction
manual may present a risk of
personal injury.
14. Check for damaged parts.
Before using the tool, carefully
check it for damage to ensure that
it will operate properly and perform
its intended function. Check for
misalignment and seizure of moving
parts, breakage of parts and any
other conditions that may afect is
operation. Have damaged guards
or other detective parts repaired or
replaced as instructed. Do not use
the tool if the switch is detective.
15. Disconnect tool. Switch of
and wait for the tool to come to a
complete standstill before leaving it
unattended. Unplug the tool when
not in use, before servicing or
changing accessories.
16. Avoid unintentional starting.
Do not carry the p Jugged-in tool
with a fnger on the switch. Be sure
that the switch is released when
plugging in.
17. Do not abuse cord. Never carry
the tool by its cord or yank it to
disconnect from the socket, keep
the cord away from heat, oil and
sharp edges.
18. Store idle tools. When not in
use, power tools must be stored in
a dry place and locked up securely,
out of reach of children.
19. Maintain tools with care.
Keep the tools in good condition
and clean for Petter and safer
performance.
Follow the instructions for
maintenance and changing
accessories inspect the tool cords
at regular intervals and keep all
controls dry, clean and free from
oil and grease.
