Bresser Thermo Hygro Quadro NLX Manual De Instrucciones página 13

tion is set to power saving mode after 6 seconds and
the display indication is deactivated. The display can be
reactivated by pressing the snooze button.
For battery operation, proceed as follows:
5. Remove the battery compartment cover.
6. Insert batteries into the battery compartment. Make
sure that the batteries are correctly aligned (+/- poles).
7. Replace the battery compartment cover.
8. Wait until indoor temperature is displayed on the base
unit.
NOTICE! When changing the type of power supply
(mains power or batteries), the power supply is tem-
porarily interrupted for technical reasons. All previ-
ously made settings will be lost.
Wireless sensor
9. Remove the battery compartment cover.
10. Insert batteries into the battery compartment. Make
sure that the batteries are correctly aligned (+/- poles).
11. Move the channel slider to the desired channel.
NOTICE! This weather station can be operated with one
or more wireless sensors. Each connected wireless
sensor must be operated on a different channel. If only
one wireless sensor is connected, it should be operated
on channel 1.
12. Replace the battery compartment cover.
9 Automatic time setting
After the power has been restored, the unit automatically
searches for the radio signal. It takes approximately 3-8
minutes for this process to be completed.
If the radio signal is received correctly, the date and time
are set automatically and the reception symbol is displayed.
13 / 80