Battery Level Indicator; Automatic Time Setting - Bresser Tendence FSX Manual De Instrucciones

NOTICE! When operating only one wireless sensor, channel
1 is recommended as the default setting.

8 Battery level indicator

1. When the level of the batteries in the base station or in
the wireless sensor reaches a critical level, the battery
level symbol appears in the appropriate area on the
display.
2. When replacing one set of batteries, always remove the
batteries from the other part of the unit and reinsert
them in the correct order (see chapter "Setting up
power supply"). Replace the batteries to be changed in
the corresponding part of the device with a completely
new set with full capacity. This ensures that the connec-
tion between the devices will be reestablished again
correctly.

9 Automatic time setting

After the power supply was established, the clock will auto-
matically search for the radio signal. This will take approx-
imately 3 to 8 minutes to finish this process.
If the radio signal is received correctly, the date and time
will be set automatically and the radio control signal icon
turns on.
If the clock fails to receive the time signal, go ahead with the
following steps:
1. Press °C/°F button on the base station for approx. 3
seconds to initate RC signal reception again.
2. If the device is still not receiving the signal, the time
must be set manually.
11 / 100