Blumfeldt Cosmic Beam Ultra Manual De Instrucciones página 26

Idiomas disponibles
  • ES

Idiomas disponibles

EN
26
Time setting
When you press the TIME button, the display shows [88]. Press the
or
button to set the time before auto power off. The minimum is one
hour and the maximum time setting is nine hours. Each time you press the
or
button, the set period will increase or decrease by one hour.
After you set the time, the system will save it automatically and return to
working mode. The temperature and the time until switch-off are then
displayed on the screen.
Switching off the appliance
Press the
button to turn off the device. The indicator light will stay on
even after the power is turned off if the device is plugged into the power
outlet.
Important notes on use
CAUTION
Risk of burns! The heater gets very hot when in use. To avoid
burns, do not touch the surface.
If you require service or repair of the device, please contact customer
service or a qualifi ed person.
To avoid damage, the power cord must be replaced by the manufacturer or
another qualifi ed person.
Do not allow children or infi rm persons to operate the device
unsupervised.
CLEANING AND CARE
Before cleaning, unplug the appliance from the wall outlet and allow it to
cool down completely.
Do not use abrasive cleaners or solvents for cleaning and never immerse
the device in water.
Clean the outside with a soft and damp cloth.
This device contains parts that are not accessible to the user. Repairs may
only be carried out by qualifi ed specialists.
loading

Este manual también es adecuado para:

10031978