Taurus HORIZON 30 Instrucciones De Uso página 7

Downloaded by: pd-oliana on 04-04-2023 15:47 CEST
EN
(Original instructions)
ELECTRIC OVEN
HORIZON 30 (VER. VI)
HORIZON 30 AIR FRY
DESCRIPTION
A Handle
B Oven's door
C Temperature selector
D Function selector
E Timer and Switch On/Off
F Cooling vents
ACCESSORIES
1 Grill Rack
2 Cooking tray
3 Cooking tray and grill handle
4 Rôtisserie arm / Turnspit
5 Rôtisserie arm's handle
6 Rôtisserie Forks
7 Crumb Tray
8 Air fry basket (only in AF model)
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
USE AND CARE:
Fully extend the appliance's power cable
before each use.
Read all the instructions
Do not use the appliance if the on/off switch
does not work.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not turn the appliance over while it is in
use or connected to the mains.
Disconnect the appliance from the mains
when not in use and before undertaking any
cleaning task.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store or transport the appliance if it is
still hot.
Keep the inside of the oven clean to avoid the
carbonising of leftover food, which may dam-
age the appliance.
Do not use the appliance to dry pets or ani-
mals.
Do not use the appliance to dry textiles of any
kind.
Don't place heavy utensils or trays on the
open door.
Ensure that there is enough ventilation
around the oven.
Ensure that the oven is completely dry before
use.
The oven should not be placed on untreated
wooden surface. Place the oven on a heat
resistant surface.
The feet of the oven can leave some marks
on the table, if this happens, remove the
marks with a damp cloth.
CAUTION: if the door or the door catch is
damaged the oven must not be used until
repaired by a competent technician.
CAUTION: Do not use the appliance if the
glass is cracked or broken.
Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the
appliance is switched off permanently.
INSTALLATION
Be sure to remove all packaging material
from inside the appliance.
Do not remove the support feet of the appli-
ance.
The appliance requires a proper ventilation in
order to work properly. Leave 20cm cleared
over the oven, 5cm behind the back and 5 cm
on each side.