HUANUO HNCM8 Instrucciones De Instalación página 5

Step 5
Make Necessary Adjustments
n
Tighten the bolt with the supplied Allen
Key (n) to fix the tilt angle.
Manage the Wires and Store the Allen Keys on Wire Clip
Step 6
Use the supplied Allen Key (n) to make the
necessary adjustments.
n
If one monitor is lower, remove the Nut (f)
and turn the bolt counter-clockwise with
supplied Allen key (n) to raise the monitor.
Install the Nut (f) after the adjustment.
Manage the wires and store the Allen keys
(n) in Wire Clip (m1) for future use.
4
n
m1