Idiomas disponibles
Idiomas disponibles
1. Crash site
2. type of accident
3. The number of injured
4. The type of injuries
1.5.2. Waste management
The pictograms on the equipment or packaging contain instructions for waste management.
For the meaning of the symbols, see the section "Safety symbols".
1.5.3. Qualifications, training and minimum age
The operator does not require special qualifications to be able to use the unit except for the
indications of a professional.
Only people over 18 years of age may use the equipment. The only exemption are those
people who have to learn its use as part of a professional training program, and always under
the supervision of a qualified adult.
In order to use the equipment, it is necessary to learn from a professional or with the instruction
manual. No specific training is necessary.
2. TECHNICAL SPECIFICATIONS
Electric connection
Engine power
Velocity
Ø of the saw
Cutting range (min – max)
Cutting disc thickness
Trunk support width
trunk support extension
Acoustic output level (idle)
Approximate weight
Values given are emission values and do not necessarily also represent safe limits for the
workplace.
Although there is a correlation between emission and immission levels, it cannot be reliably
deduced whether or not additional security measures are necessary.
Factors that influence the level of immission currently existing in the workplace include the
characteristics of the work space, other sources of noise, such as the number of machines and
other operations that are carried out nearby. The values allowed in the workplace can also
vary from country to country. However, this information should allow the user to make a better
assessment of the hazards and risks.
CL500
230V~50Hz
2.6KW P1(S6/ 40%)
2800 units/min
500x30mm
0-180mm
200mm
0-500mm
LpA
88.9dB(A) - K: 4dB(A)
LwA
108dB(A) - K: 4dB(A)
9
EN
3.8mm
77kg
