Idiomas disponibles
Idiomas disponibles
-
Do not use the machine if the product, power cable or steel cable show signs of
damage.
-
If the power cord is damaged, it must be replaced by the manufacturer or an electrician.
-
Repairs should only be carried out by an electrician. Repairs carried out by an
unauthorized person pose a serious risk.
-
The arrangement of accessories carries the same conditions.
The manufacturer and/or distributor will not be responsible for the following damages:
-
Damage caused by overload.
-
Damages caused by changes in the product.
-
Damage caused by improper use (uses not described in the instruction manual)
1.3. Residual risks and preventive actions
1. Residual electrical risks:
−
Direct electrical contact:
A faulty cord or plug can cause an electric shock. Electrically conductive parts
or faulty structural parts can cause injury.
See a professional to replace the cable or plug. Use the machine only if it is
connected to the electrical network through a differential switch.
Indirect electrical contact:
−
Unplug the machine before performing any maintenance task
Use the product only with a differential switch installed.
2. Residual mechanical risks:
−
Cuts and incisions:
Contact with the circular saw can cause severe injury.
Risk of injury from rotating parts
Always exercise caution when working with small material. Use devices to help
cut it (guides or other tools). Do not touch the saw if it is still moving. Any
damaged or worn accessory must be replaced immediately.
Entrapments:
−
Loose clothing or jewelry can easily get caught in moving parts. Always wear
tight clothing and never wear jewelry.
3. Acoustic risks:
hearing problems:
−
Prolonged work with the machine could cause hearing impairment.
Always wear hearing protectors.
4. Materials or other risks:
−
Aspiration:
The large amount of wood dust generated by the saw can have negative effects
on the lungs. There are health risks if dust emissions are not properly
vacuumed.
Always wear a mask when working with the product. Install and use vacuum
equipment to collect dust.
5. Human errors:
Improper use of personal protective equipment (PPE)
−
Using the machine without wearing proper PPE can cause external and/or
internal injuries. Always wear approved protective clothing and work carefully.
inadequate lighting:
−
Lack of light poses a safety risk. Always make sure there is enough lighting.
6
EN
