Idiomas disponibles
Idiomas disponibles
Do not use the equipment before reading the instructions carefully.
−
Follow all safety instructions in the manual.
−
−
Consider other people.
Warning
This machine should be used by one person only.
1.5. Additional security warnings
-
Hazards may be associated with the use of the log saw. Therefore, only trained and
experienced persons may handle and work with the product.
-
The operator must wear tight clothing and protective footwear.
-
Persons not specialized in the product must not work with the wood cutting saw.
-
Follow all safety instructions unconditionally to prevent accidents and damage.
-
The machine must be on a horizontal and level surface during operation and the ground
around the machine must be level, well maintained and free of debris such as shavings
and cut workpieces.
-
Arrange workpieces to be processed and finished workpieces near the operator's
normal workplace.
-
Wear gloves when handling the saw (whenever possible, they should be carried in a
tool carrier).
-
Immediately report any machine failure, including gap safety devices or saws, once
detected.
-
Familiarize yourself with the safe procedure for cleaning, maintenance and periodic
removal of chips and dust to avoid the risk of fire.
-
Follow the manufacturer's instructions for use, adjustment, and repair of the saw.
-
Observe the maximum speed specified on the saw.
-
Use the correct sharp saws.
-
Make sure that the cable ties used are suitable for their intended purpose as specified
by the manufacturer.
-
Refrain from removing sections or other parts of the workpiece from the cutting area
while the machine is running, unless a push lever is used.
-
Make sure standoff guards and other safety devices necessary for machine operation
have been installed, are in good working order, and have been properly maintained.
-
Operators must have received sufficient training in use, configuration or operation.
-
Only use saws that are certified and approved by the manufacturer.
-
Make sure that the machine, including its components, cannot tip, tip over or move
uncontrollably during transport, assembly, disassembly or deactivation during the
foreseeable useful life of the machine.
-
The operator must be informed regarding the conditions that influence the generation
of noise (for example, saws that have been designed to reduce noise, care of saws
and machinery).
-
Dust exposure is influenced by the type of material to be cut.
1.5.1. Emergencies
In case of an emergency, practice first aid and seek qualified medical assistance immediately.
Reassure the injured and protect him from further accidents. Every workplace should be
equipped with a first aid kit. You must replace any material immediately after use. When
seeking medical help, give the following information:
8
EN
