Idiomas disponibles
Idiomas disponibles
To avoid interruptions and failure during playback, only select HIGH
QUALITY when there is a fast internet connection.
25.3. Internet settings
Configure the internet settings under NETWORK.
25.3.1. Network wizard
Select NETWORK WIZARD to start searching for networks.
Then connect the internet radio to your preferred network as described in
section "11.3. Establishing a connection to a network" on page 351 onwards.
25.3.2. Establishing a WPS connection
You can establish a WPS connection under PBC WLAN
Activate the WPS connection on the device that supports WPS and then confirm
the connection on the internet radio by pressing the OK button on the remote
control.
25.3.3. Displaying settings
Information about the currently connected network and the device's MAC address is
displayed under VIEW SETTINGS.
25.3.4. Manual settings
Under MANUAL SETTINGS, select wireless connection (WLAN) and set the
DHCP function to ON or OFF.
Next, enter the SSID of the wireless network using the number/character
buttons on the remote control. Select OK and press OK on the remote control
to apply the SSID.
Next, select the encryption of your network (OPEN, WEP, WPA/WPA2). Press
OK on the remote control to confirm your selection.
Select the type of encoding by pressing OK on the remote control.
Enter the network key for the wireless network using the number/character
buttons on the remote control. Select OK and press OK on the remote control
to apply the network key.
25.3.5. Changing the NetRemote PIN
We recommend setting a new four-digit code under NETREMOTE PIN SETUP. This
can be required when establishing a connection with the app on a smartphone or
tablet PC.
25.3.6. Deleting a network profile
The device stores the last 4 WLAN networks that have been connected.
Under NETWORK PROFILE, select a network and press OK to confirm. Press
YES to confirm the subsequent prompt and delete the network from the list.
SETUP:
DE
FR
NL
ES
IT
EN
369
