UPDATING REPORTS
Revision A
First document issue
Release B
Air control change to 4,5 bar
Release B1
Disposing Notes (completed)
1
2
4
All manuals and user guides at all-guides.com
of 08/2017
PCN: 17G0279
of May 2018
PCN: 18G0109
of October 2018
PCN:
- - -
3
4
5
Contents
1. General ............................................................... 4
2. Installation of the machine .................................12
3. Bead breaking ...................................................18
4. Clamping wheels ...............................................18
5. Setting the mounting head ................................22
6. Fundamentals of Demounting and Mounting ....24
7. Demounting a tyre .............................................26
8. Mounting a tyre ..................................................28
9. Infl ating a tyre ....................................................30
10. Maintenance ......................................................36
11. Technical data ...................................................38
12.Disposing of the unit ..........................................40
1. General
1.1 Tips for the reader
Special symbols are used in this manual to facilitate
reading and understanding of pictures and written
instructions:
— Bullets indicate where an action/operation is required.
Safety rules are highlighted in grey.
Arrow indicating important information.
Arrow showing the direction of a movement.
1.2 Scope
Tyre changer with or without beading system for
Tubeless tyres
The tyre changer, with or without Tubeless wheels
system, is designed to demount and mount tyres with
a diameter of between
10"
Clamping ranges for outer and inner clamping are:
Outer clamping
Inner clamping
Clamping jaws are available under optional extras
for clamping steel wheels with a rim diameter of 8",
motorcycle wheels of 15" to 23" rim diameter.
Accessories
A series of accessories are usually available for the
machine. All accessories are indicated on the website:
http://service.snapon-equipment.net/
After accessing the website, proceed as follows:
- Select Accessory Plan (1).
- Select the reference brand in the fi eld Brands (2).
- Select the Type of product "Tyre changers" in the fi eld
Product lines (3).
- Open the fi eld Model (4) and select the specifi c
machine model among the ones in the list.
-
Enter "SEARCH" (5) to display the list of
available accessories
.
Page
and 24".
10" to 24" rim diameter
12" to 24" rim diameter
