10
1
10a
11
12
20
All manuals and user guides at all-guides.com
Rims with an asymmetrically arranged drop base
should be positioned so that the narrow rim shoul-
der faces upwards (see rim in Fig. 11).
The clamping jaws can be preset for wheels that are
diffi cult to clamp (sidewall of tyre is very stiff).
4.2 Presetting the clamping jaws
• Depress pedal (Fig. 10a, Item 1) smoothly up to the
centreposition. If the pedal is released the clamping
jaws stopin the position they have reached at the
time. Observemarks (Fig. 12) on chuck and jaws.
• Position wheel and press it down by hand on the chuck.
• Depress pedal through the stop position and
release.The wheel is clamped.
Special plastic caps are available as optional extras for
the clamping jaws so that alloy rims can be clamped
carefully.
4.3 Fitting special clamping jaws
Special clamping jaws are simply positioned on the
clamping jaws already present and snapped into place.
To install any accessory on request follow the
instructions enclosed with it.
4.4 Inner clamping of rims with a diameter of
between: 12" and 22"
• Fully depress the pedal (1, Fig. 10a) then take
your foot off the pedal. The clamping jaws move
inwards.
• Position rim and the wheel.
• Depress the pedal past the lower end of stroke
point then release it. The wheel is clamped.
• Depress the pedal. The wheel is unclamped. To
avoid damaging the surface fi nish of alloy rims,
they should be only be clamped from the outside.
Special plastic caps are available as optional extras
for the clamping jaws so that alloy rims can be
clamped carefully.
