Bulldog DC Serie Manual De Instrucciones página 16

WARNING
Do not use the winch as a lifting device or a hoist for vertical lifting.
CAUTION
The Power-Out function should be used for relieving tension on the rope,
not for extended distances.
3.1 Install/Replace the Rope
WARNING
ALWAYS complete the winch installation and hook attachment before installing the wiring.
ALWAYS pre-stretch rope and re-spool under load before use. Tightly wound rope reduces
chances of "binding", which can damage the rope.
A minimum of five (5) wraps of steel wire rope around the drum is necessary to support the
rated load.
ALWAYS spool the winch rope onto the drum in the direction specified by the drum rotation
labels on the winch and/or in the documentation. This is required for the automatic brake to
function properly.
16
CEQUENT
Operation Instructions
Maintenance
™
Figure 21
F3837-00 REV B (4782) 08/15