CASO DESIGN Slim Manual Del Usuario página 12

container, the weight of food will appear on the display.
12.3.4 Overload indicator
When the scales is overloaded, „EEEE" will appear on the display.
13 Cleaning and maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
13.1 Safety information
Please observe the following safety notices, before you start to clean the device:
The device must be cleaned and food residues must be removed at regular intervals. If
►
the scales is not maintained in a clean condition, this will have a detrimental effect on the
service life of the device and can also result in a dangerous condition of the device as well
as in growth of fungus and bacteria.
Never immerse the device into water and do not put it in the dishwasher.
►
If dampness enters into the device, this can damage the electronic components.
►
Do not use any aggressive or abrasive cleaning agents or solvents.
►
Do not scrape off stubborn dirt with hard items.
►
13.2 Cleaning
Wipe the housing and the display with a soft dry or slightly damp, lint-free cloth.
14 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety. If these were put in the non-recyclable waste or were
handled incorrectly, they could be detrimental to human health and the environment.
Therefore, do not put your old device into the non-recyclable waste under any
circumstances.
Attention
12.3.2 Tara function
Switch to weight mode and put the
container on the scales, the display will
show the weight of container.
Press the key "OFF/TARE", display
shows zero and clears the weight of
container. Then put the food into the
12.3.3 Unit exchange
In weight mode, press „Unit" to
select between „g" and „oz".
12