Technical Specifications; Electrical Wiring - Buffalo CD474 Manual De Instrucciones

Telephone Helpline: 0845 146 2887
Fault
Power indicator light comes
on but product does not
heat up
Product slow to heat up

Technical Specifications

Code Voltage
CD474 230V 50Hz
DM902 230V 50Hz
DM903 230V 50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard
The plug is to be connected to a suitable mains socket
The appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit
If in doubt, consult a qualified electrician
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible
Probable Cause
Faulty element
Faulty thermostat
Thermostat set incorrectly
Cooking surface not cleaned
Faulty element
Power
Current
Watts
1500W 6.5A
2900W 12.6A
2200W 9.5A
Call your BUFFALO agent or qualified
electrical technician
Call your BUFFALO agent or qualified
electrical technician
Check thermostat setting
Clean cooking surface as instructions
Call your BUFFALO agent or qualified
electrical technician
Plate Type
Top Bottom
Rib Rib 210 x 290 x 320
Rib Rib 210 x 540 x 320
Rib Rib 210 x
Action Required
Dimensions
Weight Kgs
h x w x d (mm)
14.5kgs
27.0kgs
x 320 19.0kgs
380
UK
5