Kingfisher CL5ZFXLK90 Manual De Instrucciones página 91

CAUTION: After use, each cooking zone will display "H" as a reminder that the
glass is too hot to touch. Though induction cooking does not generate heat, the
magnetism used to heat the pans will mean that this heat will still transfer to the
glass surface by convection. This is perfectly normal for induction hobs.
If the display flashes
• the pan is on the wrong cooking zone
• the pan is not compatible with induction hobs
• the pan is too small or not correctly centred on the zone
As a result the zone will automatically switch off after one minute.
NOTE: The control panel will not automatically switch off when "H" is displayed. When "H" disappears, the
set Stand By time will commence.
02 Using the flexible zones
The left zones A and B and right zones C and D can be used individually at the front or the rear, or be
configured to work as a flexible zone E and F .
When configured as a flexible zone, the front and rear areas are linked and can be controlled with one
power setting. As before, ensure that the pans are placed correctly on the selected cooking zone. Here are
examples of good and poor placement across a flexible zone.
1. To activate either Flexible Zone, press and hold the Flexible zone cooking key
The display will show
will operate to control each side of the hob.
2. The Timer, Temperature control, Keep warm and Boost functions all operate on the Flexible zones but
the Boil function is not active in this mode.
3. The hob will automatically maintain the correct power level wherever the pan is located on the flexible
zone. 4. To deactivate either Flexible Zone, press and hold the Flexible zone cooking key
before.
5059340445816_MNL_IN_V02.indb 90 5059340445816_MNL_IN_V02.indb 90
alternately with the power level setting, this means that:
above both zones to indicate this is engaged but only the outer set of controls
90
for three seconds.
for three seconds as
20-06-2022 13:11:39 20-06-2022 13:11:39