Maintenance; Support And Replacement Parts - STRIPMEISTER Original Manual Original

Maintenance

Before You Start:
- Remove drill from machine before performing any maintenance.
- There is no risk in taking the machine apart. Components can only fit
together one way, ensuring a factory build every time it is reassembled.
Clean and Inspect as Needed
1. Inspect Cutting Knife for damage.
2. Inspect and clean Feeder Wheel Assembly of dirt and debris.
3. Inspect whole machine for any loose parts.
Grease Every 100 Hours of Runtime
1. Grease Knife Carriage slot.
2. Grease Knife Height Adjustment Rod.
- OEM recommended grease: NLGI Grade 2 White Grease

Support and Replacement Parts

For all replacement parts, please visit:
For questions, support or troubleshooting please contact one of the following:
Visit: https://support.stripmeister.com
Call: 1-800-681-8494
Email: [email protected]
© 2016-2022 Wire Strip Meister Inc
Revision 8.0
www.stripmeister.com
. Page 6 of 8