Wash Fitting Settings - Franke ZAQUA091 Instrucciones De Montaje Y Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Adjusting the extension of the flow duration/flushing time
8.5
Use the + and – (
steps.
• The LED in the sensor of the fitting flashes:
– 4 × short for each adjustment by one step
– 2 x long when the respective end setting is reached
Switching off the fitting
8.6
Press the
• The fitting is now permanently closed.
• The LED in the sensor of the fitting flashes:
– 3 × short, break, 3 × short, break, ...
8.7
Press the
• The fitting is ready for operation.
9.

Wash Fitting Settings

Setting for continuous flow
For continuous flow, a time of 3.5 min or 11 min can be set (default 3.5 min).
9.1
Press the TEST key.
9.2
Press the
• The time for the continual flow is set.
• The LED in the sensor of the fitting flashes:
– 2 × long = 11 min continual flow time
– 4 × short = 3.5 min continual flow time
9.3
Exit the adjustment mode.
• Press the TEST key.
or
• Wait 60 seconds.
This function is not available for products manufactured before 1 June 2003. Press
the corresponding buttons to switch the fitting off.
6
) keys to adjust the extension of the flow duration in individual
OFF key.
OFF key again.
OFF key repeatedly until the required mode has been set.
Tabla de contenido
loading

Tabla de contenido