HC Cargo 210997 Manual Del Usuario página 3

III. CAUTION
If the vehicle has a tow-bar electrics self-test facility, using the 7-pin
(1)
adapter the tester may flash due to self-test facility. However when user
testing the vehicle, the voltage is applied through each of the 13-pin of the
socket, the indication will light up without flashing.
The self-test facility is not available with 13/7 pin towing adaptor because
(2)
there is no continuous feed via the 7-pin socket.
IV. SAFETY
CAUTION:
The safety instruction may not cover all possible condition.
Please understand that common sense and caution must be applied by the operator.
For safety purpose,
•
regulation when using the tester.
Please clean the tester frequently to maintain the tester in good
•
Please operate the tester carefully; avoid strong impact and shaking.
•
Please make sure the tester is removed completely, and all the wiring is
•
reconnected correctly after the test.
Please keep the
•
enough.
Please keep the tester dry during the operation. Do not use the tester
•
there is liquid, environment is damp, or any wet area.
Please keep the tester away from children. Store the tester in safe any dry area.
•
Do not use the tester if there is any damage on the tester or its accessories.
•
Do not use the tester in other application.
•
Do not soak or dip the tester with any
•
Do not expose the tester in strong sunlight or dust.
•
Do not disassemble the tester. If the tester has any •
technician check it.
Do not connect or disconnect the tester when vehicle ignition or engine running.
•
Clean the tester with dry cloth.
•
please follow the local authority and general workshop
working area clean, and make sure the indication light is clear
3
liquid.
problem,
Vedpak 233_Version 1_10.2020
210997
condition.
when
let the qualified