HC Cargo 210997 Manual Del Usuario página 2

I. INTRODUCTION
The tester is for 12V Vehicles with 13 or 7-pin
socket. For use of the
towing adaptor. The cable is long enough for the
user to do the test while sitting in the
tester can also do self-test (does not
socket), 12V power
CAUTION:
The self-test is not available with 13/7 pin towing adaptor
because there is no continuous feed via the 7-pin socket.
II. OPERATION
1. Connect the tester
male and female socket correct. Twist the out plug ring clockwise to lock the
2. If the 12V power line of the socket is working correctly, the
indication
3. Press the
4. Turn the ignition on the vehicle to
The "12V IGNITION
5. For MOT
1) Switch
2) Switch on
3) Switch on the fog light.
4) Depress the foot brake pedal.
6. User can also check the reverse light by "REVERSE" indication.
7. To remove the tester after the test, please twist the out plug ring anti-clockwise
to unlock the plug
13/7 pin Connection
13-PIN
7-pin socket, use
vehicle.
work
check, ignition, reversing light.
with the
will light up.
"Test" to check the tester circuit and LED indication.
" indication shall light up.
test, please do in turns:
on left and right hand light.
the side light.
7-PIN
13/7 pin
The
for 7-pin
vehicle's towing socket. Make sure to line up the
"ON" position, do not start the
Insert
2
210997
"12V CONTINUOUS"
vehicle's engine.
Vedpak 233_Version 1_10.2020
plug.