Idiomas disponibles
Idiomas disponibles
Footplate Adjustment
stalled and secured.
extends beyond the footplate and all the
way through the workpiece throughout the
stroke. Blades may shatter if the blade hits
the footplate or hits the work at an angle that
is nearly head-on.
The footplate (2) tilts in order to keep as
much of its surface in contact with the work
surface (Fig. 7).
The footplate (2) can also be locked into any
position along 1-1/4" of travel to optimize
blade life and/or to reduce blade protrusion
beyond the end of the footplate, such as
when cutting into large diameter pipe or into
walls (Fig. 9).
To adjust the footplate position, loosen the
footplate screws (13) with the hex key (5),
move the footplate (2) into the desired po-
sition, and tighten the footplate screws (13)
with the hex key (5). (Fig. 8)
GSA18V-110 202206.indd 13
Operation
Do not operate the saw
without
footplate
To reduce the risk of in-
jury, be sure the blade
Fig. 7
in-
Fig. 8
(2)
-13-
(2)
(13)
(5)
8/17/22 8:24 AM
