Idiomas disponibles
Idiomas disponibles
OPERATION
Using the hob equipped with igniter knobs
("Zp" model)
● push down the knob of a selected burner
until you feel resistance and turn left to the
"large flame"position
● hold the knob until gas ignites
● once flame ignites, release the knob and
adjust flame size.
Using the hob equipped with a flame-
failure cut-off device ("Zt" model)
In hobs equipped with a flame-failure
cut-off device, hold the pushed down
knob in the "large flame" position for
approximately 10 seconds to activate
the a flame-failure device .
42
Repeat the above step if flame does
not ignite.
If flame is extinguished, the flame-
failure device will cut off gas supply
within about 60 seconds.
You can open and control the gas
supply to the burners using knobs
with flame-failure cut-off device (Zt
models).
