SETTING UP YOUR
SINGLE-SERVE
COFFEEMAKER
INITIAL CLEANING FOR USE
WITH PODS
Perform an initial cleaning before making
your first beverage. Follow these
instructions, without inserting a pod or
espresso capsule.
1. Insert charcoal water filter if you haven't
already. Instructions on page 9.
2. Remove water reservoir from the unit.
3. Fill the reservoir in sink and put back on
unit.
4. If you haven't already, plug the power cord
into an independent outlet. The coffeemaker
will turn on and be ready for use.
5. Open and close the brew head. Do not add
a pod.
6. Place mug on the drip tray.
7. Using the START/STOP knob, select
the 6 oz. cup POD size and press the
START/STOP knob. POD indicator will
flash slowly and the hot water will start
to dispense momentarily.
8. A beep will sound when the one-time
cleaning process is complete. Discard hot
water. Your brewer is ready to use.
INITIAL CLEANING FOR
ESPRESSO CAPSULES
1. Repeat steps 1 to 4 in INITIAL CLEANING
WITH PODS.
2. Open and close the brew head. Do not add
an espresso capsule.
3. Move drip tray to adjustable tray position
to avoid any splashing and place espresso
cup on tray.
4. Using the START/STOP knob, select
the Single espresso size and press the
START/STOP knob. Light will flash slowly
and the hot water will start to dispense
momentarily.
5. A beep will sound when the one-time
cleaning process is complete. Discard hot
water. Your brewer is ready to use.
12
