cecotec bongo A Serie Manual De Instrucciones página 42

ENGLISH
3. PRODUCT ASSEMBLY
Unfold
Pull up the stem while pressing down the rear fender.
Raise the stem, place the folding tab in a close position and turn the fixing ring to hold the tab.
Fig. 25.
Fix the brake with an M6 hex wrench.
Paying attention to the rotation direction, tighten the handlebar.
Fig. 26.
Fold
Turn the fixing ring to loosen it.
Open the folding tab.
Fig. 27.
Lower the folding tab and then the stem.
Align the closing hook with the gap on the rear fender and press it down to ensure it is locked.
Fig. 28.
4. OPERATION
Push buttons
Power switch
Long press this push button to turn the scooter on or off.
Throttle
Use it to start the scooter up and to accelerate.
Brake
Hold it pressed to stop. Gently step on the rear fender to assist the braking process.
Function
Press this push button to adjust speed. Select between:
ECO mode: No icon is shown on the display.
COMFORT mode: The displays shows a white "D".
SPORT mode: The display shows a red "D".
Headlight and rear light
Both the headlight and the rear light will remain on as long as the electric scooter is turned on.
The rear light will blink when the brake is used.
42
BONGO SERIE A ADVANCE MAX CONNECTED