Cleaning And Maintenance - CORBERO CCSF5222GF Manual De Instalación Y Funcionamiento

EN
Replacement of Activated Carbon Filter
You should use 2 carbon filters on the product.
In order to put the carbon filter in place, the channels on the motor
cover should be brought to alignment with the lugs on the filter and
rotate it half turn clockwise. To remove it, you should rotate it
anticlockwise by half turn. (
Cleaning
 Before maintenance and cleaning operations, you should
remove the power cable from the socket or switch the hood
off.
 External surfaces of the hood should be wiped with a cloth
damped with soap water.
 Do not use corrosive and dangerous chemical materials.
 Be careful that water or similar substances should not contact
with the electronics.
 For products made of stainless sheet, use of commercially
available maintenance and cleaning agents for stainless
product will ensure your product to serve longer.
 Aluminum cartridge filters are washable in the dishwashing machines.
 Aluminum cartridge filter should be washed one in several
months (after each 40 operating hours in average) depending
on frequency of use with hot soapy water or, if possible,
individually in the dishwashing machine (maximum 60°C).
 After washing, aluminum cartridge filter and its frame may
discolour. This is normal and does not affect function of the
filters.
 Remove the aluminum cartridge filter by pushing the spring catch at
the end.
After cleaning, allow it to dry. Do not put in un place before it gets dry.
Figure 10)
(Figure 10)

CLEANING AND MAINTENANCE

22