Oils accumulating on the filters, which are not cleaned and/or replaced
timely cause fire risk.
If the cleaning is not performed periodically and by proper methods, your
product may have fire risk. You should clean inside and outside of the hood by giving
due heed to the maintenance instructions (minimum once in a month).
Oils accumulating on the filters, which are not cleaned and/or replaced
timely cause fire risk.
If the cleaning is not performed periodically and by proper methods, your
product may have fire risk. You should clean inside and outside of the hood by giving
due heed to the maintenance instructions (minimum once in a month).
Do not use any filtering materials not resistant to heat and flame instead of
the existing filter on the product. Do not operate your product without filter.
Power cable should not run near the ranges because it may melt and cause
fire as it would expose to high temperature.
If you operate lamps of the product for a long time, do not touch the lamps.
Lamps may burn your hand as they are still hot.
Unless it is specially specified, never use the hood as a supporting surface.
Do not place any weight on it.
Use the screw supplied with the product for installation or if they are not
supplied then purchase proper type of screws. For installation, use screws with
correct diameter and height as specified in the manual.
Regulations related to exhaust of the outlet air should be observed.
EN
11