Idiomas disponibles
Idiomas disponibles
EN
BRIDGE MODE (BRIDGE)
Set the operating selector on the rear of the power amplifier to the BRIDGE position.
In this mode, the input of the two channels will be what is set as the CH A channel input signal. The two
channels of the power amplifier are connected internally so that their power is combined into one single output.
Connect the CH A input and BRIDGE output, positive (+) connectors on the screw terminals or the banana
plugs, or the CH A loudspeaker connector
The volume is adjusted with channels A and B. To avoid distortion, it is recommended that both controls be
placed in the same position when adjusting signal volume.
4
