1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7393B
  6. Instrucciones de instalación

Metra 95-7393B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
A
Metra. The World's Best Kits.
®
Hyundai Accent
*Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
B
MetraOnline.com
2018 up*
for more detailed information about the product and up-to-date vehicle
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
95-7393B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring harness: Please visit metraonline.com
for wiring harness options
Antenna adapter: 40-KI11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 1/7/22 INST95-7393B
Tabla de contenido
loading

Manuales relacionados para Metra 95-7393B

Resumen de contenidos para Metra 95-7393B

  • Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7393B...

  • Página 2: Dash Disassembly

    2. Remove just (4) panel clips. (Figure A) radio. Slide the radio out, then unplug and remove the radio. (Figure B) To the 95-7393B radio trim panel: Continue to Kit Preparation 1. Clip in the factory a/c vents. (Figure B) 2. Attach the factory (4) panel clips.

  • Página 3: Kit Assembly

    2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 3. Secure the radio assembly to the dash using the factory screws.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7393B...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7393B...

  • Página 6: Desmontaje Del Tablero

    2. Quite solo (4) ganchos del panel. el radio. Deslice el radio hacia afuera y, después, desconéctelo y quítelo. (Figura B) Al panel de moldura de radio 95-7393B: 1. Enganche en las rejillas de aire Continúe con la preparación del kit acondicionado de fábrica. (Figura A) (Figura A) 2.

  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de Axxess. Pruebe el radio para asegurarse de que funciona bien. 3. Sujete el ensamble del radio al tablero usando los tornillos de fábrica.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7393B...

Tabla de contenido