1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7398
  6. Instrucciones de instalación

Metra 95-7398 Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Panel clips (5) • D) Panel clip legs (3) • E) #4 Phillips screws (12)
A
Metra. The World's Best Kits.
®
Hyundai Venue
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision
• Painted scratch resistant matte black with silver vent trim
B
C
E
MetraOnline.com
2020-Up
for more detailed information about the product and up-to-date vehicle
D
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
95-7398
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
See metra-online.com or axxessinterfaces.com
for audio and SWC interface options
Antenna Adapter: 40-KI11
TOOLS REQUIRED
• Panel removal tool • Socket wrench
• Phillips screwdriver • Cutting tool
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 1/7/22 INST95-7398
Tabla de contenido
loading

Manuales relacionados para Metra 95-7398

Resumen de contenidos para Metra 95-7398

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7398...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY KIT PREPARATION 1. Unclip and remove the center dash trim 1. Cut and remove the area marked in the panel which includes the a/c vents. This sub dash and bend metal bracket out panel is incredibly difficult to remove. of the way to make room for the radio Remove shaded area Start from the top clips then work down.

  • Página 3: Kit Assembly

    (Figure D) complete all necessary connections to the radio. Metra recommends using the 5. Attach the (5) supplied panel clips to proper mating adapter from Metra and/ the panel clip legs and radio trim panel.
  • Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7398...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7398...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO PREPARACIÓN DEL KIT 1. Desenganche y quite el panel de 1. Corte el área marcada en el subtablero, moldura del tablero central, que incluye quítela y doble el soporte de metal con las rejillas de aire acondicionado. El el fin de abrir espacio para que entre el Quite el área sombreada panel es increíblemente difícil de quitar.

  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores de acoplamiento 5. Fije los (5) ganchos para panel incluidos adecuados de Metra o de AXXESS. Vuelva a las patas del gancho para panel y al a conectar la terminal negativa de la panel de moldura para radio.
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7398...

Tabla de contenido