1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-7391B
  6. Instrucciones de instalación

Metra 95-7391B Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) #8 x 3/8" Phillips screws (4)
A
Metra. The World's Best Kits.
®
Kia Rio/Rio
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
B
MetraOnline.com
5-Door 2018-up*
C
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
95-7391B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . .................................................2
Kit Preparation . ......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com for
wiring harness options
Antenna Adapter: 40-KI11
Steering Wheel Control Interface: ASWC-1
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 1/7/22 INST95-7391B
Tabla de contenido
loading

Manuales relacionados para Metra 95-7391B

Resumen de contenidos para Metra 95-7391B

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7391B...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY KIT PREPARATION 1. Unclip and remove the top half of the 1. Cut the shaded area in the sub-dash to steering column shroud and gauge allow room for the aftermarket radio. cluster trim panel. These panels are (Figure A) connected together by a piece of material and will come out as one piece. Continue to Kit Assembly Remove shaded area (Figure A) 2. Unclip and remove the a/c vent panel surrounding the radio. (Figure B) 3. Remove (4) screws securing the radio. Slide the radio out, then unplug and remove the radio. (Figure A) (Figure A) Continue to Kit Preparation (Figure B) 386.257.1187 MetraOnline.com...

  • Página 3: Kit Assembly

    KIT ASSEMBLY 1. Secure the radio brackets to the radio trim panel using the (4) #8 x 3/8” Phillips screws provided. (Figure A) 2. Slide the radio into the bracket/panel assembly, then secure it using the screws provided with the radio. (Figure B) 3. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. 4. Secure the radio assembly to the dash using the factory screws. (Figure A) (Figure B) 5. Reassemble the dash in reverse order of disassembly to complete the installation. REV. 1/7/2022 INST95-7391B...
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7391B...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/7/22 INST95-7391B...

  • Página 6: Desmontaje Del Tablero

    DESMONTAJE DEL TABLERO PREPARACIÓN DEL KIT 1. Desenganche y quite la mitad superior 1. Corte el área sombreada en el de la cubierta de la columna de dirección subtablero con el fin de hacer espacio y el panel de moldura del tablero de para el radio genérico.

  • Página 7: Ensamble Del Kit

    Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de Axxess. Pruebe el radio para asegurarse de que funciona bien. 4. Sujete el ensamble del radio al tablero...
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7391B...

Tabla de contenido