Chicco MYSA Manual De Instrucciones página 6

Ocultar thumbs Ver también para MYSA:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
INSTRUCTIONS
FOR USE
RECARO AVAN ADAPTORS FOR MYSA
STROLLER
IMPORTANT – READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP THEM
OUT OF REACH OF CHILDREN.
WARNINGS
• WARNING: The adaptors can only be used
with the Mysa stroller.
• WARNING: Only RECARO AVAN car seats can
be installed on these adaptors.
• WARNING: Before use, check correct fixing
of the adaptors to the frame of the stroller.
• WARNING: Before use, make sure that the
car seat is correctly fitted by pulling up on
the car seat.
• Keep adaptors out of reach of children when
they are not in use.
ADVICE
FOR
MAINTENANCE
Cleaning and maintenance operations must
only be carried out by an adult.
CLEANING
After possible contact with water, dry the metal
parts in order to avoid the formation of rust. Do
not use solvents or abrasive products to clean
the plastic components. After use, keep the
adaptors in a dry place.
INSTALLATION AND USE OF ADAPTORS
WITH THE RECARO AVAN CAR SEAT
Before installing the adaptors on the stroller,
the stroller seat must be removed.
1. Position the adaptors on the frame of the
stroller inserting the plastic component on
the joint (Fig. 1), being sure to match the
CLEANING
AND
adaptor marked L (left) with the left side and
the adaptor marked R (right) with the right
side (Fig. 1A), considering the forward direc-
tion. Once the adaptors have been properly
mounted on either side, the stroller is ready
to be attached to the car seat (Fig. 1B).
INSTALLATION AND USE OF ADAPTORS
WITH THE RECARO AVAN CAR SEAT
2. To install the RECARO AVAN car seat insert
the car seat's lateral connectors into the pre-
viously mounted adaptors (Fig. 2-2A).
WARNING: The car seat should be fixed only
and exclusively facing parent.
3. To remove the Car Seat press the button on
the back of the car seat and pull upwards us-
ing the handle on the Car Seat (Fig. 3).
DISASSEMBLING THE ADAPTORS
The stroller can be closed with the adaptors
installed on the frame.
4. To remove the adaptors pull the internal le-
ver and lift upwards (Fig. 4).
WARRANTY
The product is guaranteed against any lack of
conformity under normal use as specified in
the instructions. The warranty does not, there-
fore, apply to damage caused by improper
use, wear or accidents. For the duration of the
warranty against lack of conformity, see the
specific provisions of applicable national laws
in the country of purchase, where present.
6
Tabla de contenido
loading

Tabla de contenido