9. Wiring diagrams
Motor-fan connection diagram
Important. The motors are equipped with inner thermal protection with automatic reconnection. Before using motor
speed control systems verify the compatibility with the motors. Non compatible systems may damage motors or incre-
ase noise level; Modine will not be responsible for model performance with speed control systems. For fans equipped
with thermal contacts (TK), these must be connected to the control circuit. For models supplied with wiring in a jun-
ction box, remove the cover to make the connection.
Model
Motorfans
Frequency
Electrical consumption (high speed, Δ)
RPM (high speed, Δ)
Electrical consumption (low speed, Y)
RPM (low speed, Y)
Heater connection diagram
Important. Application of adequate thermal control systems on feeder lines is mandatory. Performance of all electric
heaters must be periodically controlled to avoid damage due to ice build-up. Modine is not liable in any way for defects
caused by non detected malfunctions. For models supplied with wiring in a junction box, remove the cover to make the
connection. It is compulsory to use power cables with a minimum cross-section according to the technical standards
in force in the country of installation, depending also on the laying method, the length of the cables and their type. To
minimise the risk of indirect contact, it is advisable to earth the unit, using the earth pole (where present). For further
information please refer to the diagrams supplied with the model.
Ø450 fan diameter unit - 6 rows
Model
IDE "ED"
Ø450
Rows
Total power
W
IDE 41A04
41B04
42A04
41A07
41B07
42A07
41A10
41B10
42A10
n° x Ø mm
1x450
2x450
Hz
50
50
A
0 79
1 58
W
430
860
1370
1370
A
0 53
1 06
W
330
660
1030
1030
41A04
42A04
43A04
41A07
42A07
43A07
41A10
42A10
43A10
6
6
6
5040
10200
15000
42B04
43A04
43B04
52A04
52B04
42B07
43A07
43B07
52A07
52B07
42B10
43A10
43B10
52A10
52B10
3x450
2x560
50
50
2 37
3 30
1290
1680
1370
1360
1 59
2 10
990
1280
1030
1090
RBA - High power electric heater in coil
RSA - High power electric heater on inner drip tray
53A04
53B04
54A04
54B04
53A07
53B07
54A07
54B07
53A10
53B10
54A10
54B10
3x560
4x560
50
50
4 95
6 60
2520
3360
1360
1360
3 15
4 20
1920
2560
1090
1090
29
www.modine.com