Makita HR2631F Manual De Instrucciones página 12

Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HR2641
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HR2320T
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HR2630
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model HR2630T
Work mode: hammer drilling into concrete
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: chiselling function with side grip
Vibration emission (a
Uncertainty (K): 1.5 m/s
NOTE:
• The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
• The declared vibration total value(s) may also be used
in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
EC DECLARATION OF CONFORMITY
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
12
2
): 9.8 m/s
h, Cheq
2
2
): 11.6 m/s
h, HD
2
2
): 8.1 m/s
h, Cheq
2
2
): 15.9 m/s
h, HD
2
2
): 12.8 m/s
h, Cheq
2
2
): 15.4 m/s
h, HD
2
2
): 10.8 m/s
h, Cheq
2
2
): 14.5 m/s
h, HD
2
2
): 10.9 m/s
h, Cheq
2
ENG901-2