Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Portability
Import Config.
Loading the configuration from the USB stick (directory: Removable disk\Portability\Config) to the machine. Holding
down on the push-button no. 1 ( ) deletes the configurations on the USB stick.
Export Config.
Export the machine configuration to the USB stick (directory : Removable disk\Portability\Config).
Import Job
Importing Jobs to the machine according to the processes available in the USB key's Removable Disk directory.
Export Job
Exporting Jobs from the machine to the USB stick procedure (directory : Removable disk\Portability\Job).
Caution, old jobs on the USB stick may be deleted..
To prevent data loss during data import or export, do not remove the USB flash drive or turn off the machine. The file name
is linked to the machine name and serial number.
The USB stick is not included.
Calibration
Calib. Cables
Function dedicated to the calibration of welding accessories such as MIG torch, or electrode holder and ground clamp
cables. The purpose of calibration is to compensate for variations in the length of the accessories in order to match
the selected voltage value. Once started, the proceedure is illustrated with an animation on the screen.
Important: The cable calibration must be repeated each time the torch, harness or ground cable is changed to ensure
optimal welding performance.
Gas flow control (MIG-MAG)
In the main screen, holding down on button no. 1 allows you to adjust the gas flow on the manometer
without unwinding the supply wire. Once started, the proceedure is illustrated with an animation on the
screen. The gas flow setting should be checked periodically to ensure optimal welding.
Gas purge (TIG)
The presence of oxygen in the torch can lead to a decrease in mechanical quality and can result in less
corrosion resistance. To flush the gas from the torch, press and hold button no. 1 and follow the on-
screen procedure.
17
Tabla de contenido
