Dunsch DU30040-30CTF Instrucciones Originales página 27

 Keep handles dry, clean, and free from oil and grease. Greasy, oily handles
are slippery causing loss of control.
 Cut wood only. Do not use chain saw for purposes not intended. For
example: do not use chain saw for cutting plastic, masonry or non-wood
building materials. Use of the chain saw for operations different than
intended could result in a hazardous situation.
Risk of kickback!
Always hold the chain saw with your right hand on the rear handle and your
left hand on the front handle.
Kickbacks occur if the upper side or tip of the saw rail touches wood or other
solid objects. The device is thrown back towards the user with great energy,
possibly resulting.
Dangerous kickbacks may occur when working with the power tool!
Extremely serious to fatal injuries may be the consequence!
Before starting work with the power tool, check that the chain brake is in perfect
working order.
Ensure that the area of the saw rail shown in the diagram does not touch wood
or other solid objects.
To minimize the risk of injury in the event of a kickback, the power tool features a
chain brake which is automatically actuated by the kickback and immediately
stops the chain.
For reasons of safety always check that the chain brake functions before using
the power tool.
If kickbacks are less violent, the chain brake may not be actuated automatically.
For this reason it is important that the power tool is held firmly with both hands.
The risk of a kickback can only be reliably reduced by employing a cautious and
correct working method!
SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS
Use only batteries and chargers applicable for this machine.
GB
25