Idiomas disponibles
Idiomas disponibles
9
6. Finish like the picture.
7. Make holes on the wall, the distance between the
two holes on the hanger is 2CM. and the distance
between the two hangers basic on the shower
panel.
8. Put four screw sets into the holes in the wall, then
use four screws to fix the hangers on the wall.
9. Put the shower panel on the wall. And connect
the hot/cold water-in hoses. Both hot and cold
supply feeds must have accessible isolated valves
fitted in-line for servicing purposes (not supplied).
10. The two filters should be put in each water-in
S/S hose, the place to link hot/cold water.
11. Finish as the picture.
