Tabla de contenido
may be the best option. Each router
must be assigned its own IP address,
which is used for communication with
the management PC. Please refer to the
following installation instructions to get
started with the Web UI interfaces.
Web User Interface
Once the router has been successfully
installed, you can begin configuration,
monitor the LED panel, and display
graphical statistics using a web browser.
Supported browsers include: Microsoft
Internet Explorer , Firefox, Chrome, and
Safari.
You need the following equipment to
access the Web UI of your device:
• A PC with a RJ-45 Ethernet port
• A standard Ethernet cable
1. Connect the Ethernet cable to the
router' s Ethernet port and to the Ethernet
port on the PC.
2. Configure the PC's IP address to be in
the network segment as the router. The
router's default IP address is 192.168.0.1,
with subnet mask 255.255.255.0.
3. For example, to connect to the router
using the default settings, your PC
should have an IP address in the range:
192.168.0.2-.254 and a subnet mask of
255.255.255.0.
4. Open the web browser and enter
http://192.168.0.1/ in the address box.
5. Log in to the router. The default user
name is admin and the default password
is admin.
DWM-311
Additional Information
If you are encountering problems setting up
your network, please refer to the user manual.
It contains much more detailed information to
get you up and running with your network.
Additional help is available through our offices
listed at the back of the user manual or online.
To find out more about D-Link products or
marketing information, please visit the D-Link
website at: http://www.dlink.com/.
®
5
Tabla de contenido
