Introduction; Intended Use; Equipment; Package Contents - Parkside Performance PWSAP 40-Li A1 Traducción Del Manual De Instrucciones Original

CORDLESS ANGLE GRINDER
40V PWSAP 40-Li A1

Introduction

Congratulations on the purchase of your new
appliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the specifi ed range of applica-
tions. Please also pass these operating instructions
on to any future owner.

Intended use

This tool is intended for grinding, cutting** and
roughing metal, concrete or tiles without the use of
water. Any other usage of or modifi cation to the
appliance is deemed to be improper and carries a
signifi cant risk of accidents. The manufacturer
accepts no responsibility for damage resulting from
improper use. The appliance is not intended for
commercial use.
** The blade guard for cutting must be ordered via the
service department.
Explanation of the symbols used
Always operate with two hands.
Do not use the blade guard for abra-
sive cutting work**.

Equipment

1 Safety lock-out
2 ON/OFF switch
3 Battery charge level button
4 Ready2Connect LED
5 Battery display LED
6 Overload LED
7 Two-hole assembly spanner
8 Additional handle
9 Spindle locking button
■ 62 │ GB │ MT
0 Screw thread (3 x) for the additional handle
q Release button for the battery pack
w High-speed charger*
e Red control LED
r Green control LED
t Battery pack*
z Mounting spindle
u Blade guard
i Mounting fl ange
o Clamping nut
p Fine adjustment screw
a Clamping lever
s Coding lug
d Coding groove

Package contents

1 angle grinder 40V
1 additional handle
1 blade guard (pre-assembled)
1 two-hole assembly spanner
1 operating manual
Technical specifi cations
Cordless angle grinder 40V PWSAP 40-Li A1
Rated voltage
Rated speed
Disc size
Thread size
Battery PAPS 204 A1*
Type
Rated voltage
Capacity
Cells
High-speed charger PLG 20 A3*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
40 V (DC)
n 6000 rpm
Ø 230 mm
M14
LITHIUM ION
20 V (DC)
4 Ah
10
230–240 V ~ 50 Hz (AC)
120 W
T3.15A
3.15 A
PWSAP 40-Li A1