Idiomas disponibles
Idiomas disponibles
3B SCIENTIFIC ® PHYSICS
Function generator SG10 (230 V, 50/60 Hz) 1017337
Function generator SG10 (115 V, 50/60 Hz) 1017338
Instruction manual
01/14 SD/ALF
1. Safety instructions
The function generator SG10 conforms to safety
regula-tions for electrical measuring, control and
laboratory equipment as specified in DIN EN 61010
Part 1. It is to be operated in dry rooms as appro-
priate for the use of electrical equipment.
Safe operation of this equipment is guaranteed as
long as it is used as stipulated. However, there is
no guarantee of safety if the equipment is used
incorrectly or carelessly.
If there is any suspicion that the equipment can no
longer be operated without risk (e.g. if visible dam-
age is detected), the equipment must immediately
be with-drawn from use and secured in such a way
as to prevent its inadvertent operation.
•
Only use the instrument in a dry environment.
•
Do not apply any external voltage to the output
sockets.
•
Use only with the supplied plug-in power sup-
ply.
1
2
3
4
5
The SG10 function generator is a generator with a
power amplifier for generating sine waves of very
low frequency. It is particularly well suited for use in
experiments which are to be performed by the stu-
dents themselves.
The equipment outputs a sine-wave voltage of ad-
justable amplitude and frequency. Two LEDs (red
and green) indicate the polarity of the output volt-
age, and their brightness is an indication of the
amplitude.
The output is resistant against short circuits, and
protected from induced voltages and spark dis-
charges.
Power is supplied via a 12 V AC plug-in power sup-
ply.
The function generator SG10 with order number
1017338 is intended for a mains voltage of 115 V
(±10%), whereas the one numbered 1017337 is for
230 V (±10%).
1
Plug-in power supply
Amplitude adjustment knob
Frequency adjustment knob
4-mm output sockets
Amplitude/polarity indicators
2. Description
