Tool Operation - Würth ARS 10-1/4 Manual De Instrucciones

TOOL OPERATION

Tightening the bolt or nut
1. Select the forward / reverse switch to "forward"
position.
2. Press socket onto the anvil.
3. Push on main switch to start the tool. The tool has a
build in overload device to cut off the power once the
tool reaches its maximum torque. This is to protect the
motor in the tool if over load and end user's wrist from
harm by the tool motion.
4. This tool can also be used manually after the bolt is
tightened.
Loosening the bolt or nut
1. Select the forward / reverse switch to "reverse"
position.
2. Press socket onto the anvil.
3. Push on main switch to start the tool. Turn the bolt
manually 1~2 turns if the tool can not release the bolt
initially.
17