Technical Data; General Safety Warnings - Probuilder 32891 Manual De Instrucciones

MITRE SAW WITH TELESCOPIC EXTENSION
Introduction
To get the most out of your new mitre saw
with telescopic extension, please read these
instructions before use. Please also save the
instructions in case you need to refer to them
at a later date.

Technical data

Voltage/frequency:
Power rating: S1 1,700 W, S6 25% 2,000 W
Speed:
Saw blade:
Hole diameter:
Max. cutting capacity (width x height):
0° × 90°:
0° × 45°:
45° × 45°:
45° × 90°:
Sound pressure, L : 101,6 dB(A), K
pA
Sound level, L : 114,6 dB(A), K
WA
Accessories supplied: 2 pull-out rails, 1 clamp,
1 dust bag, 1 saw blade and spanner
Easy transport with carrying handle

General safety warnings

Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your mains operated
(corded) power tool or battery-operated
(cordless) power tool.
220-240 V ~ 50 Hz
4,500 rpm
Ø 255×2,8 mm, 36 T
30 mm
340 mm x 90 mm
340 mm x 45 mm
240 mm x 45 mm
240 mm x 90 mm
=3 dB(A)
pA
=3 dB(A)
WA
Work area safety
• Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
• Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
GB
53