Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Starting
Reset 1 Switching program remains
MENU
Press
together.
Reset 2 Switching program deleted
Press all 5 buttons together.
First release button
MENU
, then release all
other buttons.
The time will be started at 0h00.
2. Radio receiving
After connecting to mains supply, a reset
or by pressing button
OK
the time switch
tries to receive the time code.
The time will be started at 0h00.
If the time switch recognises an appropri-
ate signal from the antenna the receiving
wave symbol
blinks.
Every full hour the time switch tries to
receive the time code.
When any button is pressed or during a
useless attempt to receive the time code,
the radio receiving will be interrupted.
Fault clearing
If 10 minutes after starting the radio receiving the symbol
is still blinking, the time switch does not receive an appropri-
ate signal.
Check the installation, the adjustment of the antenna or
examine the ambient conditions concerning electromagnetic
influences.
3. Setting actual time and weekday
Button
MENU
activates the menu.
Select SET TIME... with button
and
confirm with button
OK
.
Set actual hour with buttons
and
confirm with button
OK
.
Set actual minute with buttons
and
OK
confirm with button
.
Set actual day with buttons
and
confirm with button
OK
.
Every full hour the time switch tries to
receive the time code.
All manuals and user guides at all-guides.com
4. Setting switching times
MENU
Button
activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
Select desired day with buttons
confirm with button
If chosen day already contains a program,
the program and Clr will be displayed.
To delete the program confirm with button
With button
the setting can be copied to the next day
(see copying switching times).
Set ON time with buttons
confirm with button
Advice:
Setting advances in minutes.
Press once = 1 minute
Hold button = higher speed
Set OFF time with buttons
confirm with button
Further settings can be executed as described
above.
A maximum of 8 ON and OFF times can be set per day.
24
Up to the 7th OFF time the settings for one
18
6
day have to be confirmed again with
1234567
button
OK
.
12
Copying switching times
Call up the copy function with button
Select the day on which you will
copy the setting times with buttons
Confirm selection with button
For further days repeat operation.
SET TIME
Terminating program input
MENU
Press button
as required until the
SET TIME
actual time appears.
5. Delete switching times
MENU
Button
activates the menu. Confirm PROG... with button
SET TIME
Confirm PROG NEW... with button
1234567
Select desired day with buttons
and confirm with button
To delete program press button
24
New program can be set now (see §4).
18
6
1234567
If this day does not contain any program press button
12
MENU
Press button
as required until the actual time appears.
OK
.
PROG
NEW
and
24
OK
.
18
6
1234567
12
OK
.
PROG
NEW OFF
and
24
OK
.
18
6
1234567
12
PROG
NEW
24
and
18
6
1234567
OK
.
12
PROG
NEW
24
18
6
1234567
12
PROG
NEW
.
24
18
6
.
1234567
12
PROG
NEW
24
OK
.
18
6
1234567
12
24
18
6
1234567
12
OK
.
PROG
NEW
24
18
6
OK
.
1234567
12
OK
.
OK
twice.
6. Check switching times
OK
.
MENU
Button
activates the menu. Confirm PROG... with button
Select TIME CHECK... with button
ON
OK
button
. Select desired day with buttons
confirm with button
OK
.
With button
OK
check setting times one
after another.
Free storage locations will be
displayed with FrEE.
Terminating check switching times
MENU
Press button
as required until the
actual time appears.
ON
7. Hand ON/OFF
Select hand symbol with
button
State of contact set by program
will be reversed.
= ON
= OFF
The next program automatically returns the switch to ON or
OFF as programmed.
8. Continuous switching
Select with button
the symbol
for continuous
override ON
or
continuous override OFF
Terminating continuous switching
Select symbol with button
symbol
OK
.
operation.
Mains failure
Mains failure will be displayed by no U.
Buttons are inoperative.
Reset is possible.
OK
.
and confirm with
and
TIME CHECK
ON
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
for automatic
Tabla de contenido
