Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating Instructions
Safety Instructions During the Charging Process
•
Do not kink or squeeze the charging cable. Do not draw the charging cable over sharp edges or hot surfaces
•
Do not use the charging station if damage or tampering is visible. If damage is visible, Inform the operator. Until
damage is repaired, keep away from the charging station and do not attempt to charge an EV.
•
Grip the power plug/connector to disconnect from the charging unit. Do not remove the connector by pulling on
the cable.
•
Never touch the power plug/connector with wet hands.
•
Do not connect or disconnect any cables during a thunderstorm.
The Charge Station is equipped with an auto-reset feature. – If this Charge Station is connected to a vehicle at
•
the time that power is restored following an outage, charging may resume automatically. – If this Charge Station
is connected to a vehicle and a ground fault trip occurs, charging may resume automatically after a delay period.
Risk of Overheating and Fire
Unauthorized accessories should not be used with this device due to risk of fire and/or overheating.
•
DO NOT use a charging cable that is not approved for the vehicle.
•
DO NOT use an extension to connect the charging station to the vehicle
•
DO NOT use an adapter or adapter cable.
Basic Charging Procedure
•
Using the charger connector, gently insert the connector into the EV. Be sure not to force the connection or
bend any pins in the connector.
•
Observe blue LED on the front of the device
o Dim blue- Device not connected/Standby
o Bright blue- Device ready to deliver energy
o Pulsing blue- Device delivering energy to the vehicle
Intelligent Backup Power
•
For operating instructions regarding this feature, please refer to your vehicle manual
P a g e
| 17
Tabla de contenido
